- 42
- 122 096 747
Cool Again Restoration
Romania
Приєднався 14 сер 2019
Welcome to Cool Again Restoration ! My name is David and I'm responsible for everything that happens around here.
This channel is all about the things I do and how I do it . Mainly you will see here restoration videos because CONVERTING OLD RUSTY THINGS TO NEW THINGS ARE SO SATISFYING and I will also do some customization project which I hope you like it.
FAQ:
1.Where I find the products that I restore? I walk often through the flea market but most of them are from Etsy or Ebay or some sellers from instagram.
2.What I do with them once they are restored? I will keep all of them and when this channel is successful I will offer them for sale and the money I receive will be donated to the needy.
I'm still learning how to work with UA-cam,so please help me out by subscribing and if you like my content tell me what you think in the comments section.
©COOL AGAIN RESTORATION ALL RIGHTS RESERVED© Thank you! Best regards!
This channel is all about the things I do and how I do it . Mainly you will see here restoration videos because CONVERTING OLD RUSTY THINGS TO NEW THINGS ARE SO SATISFYING and I will also do some customization project which I hope you like it.
FAQ:
1.Where I find the products that I restore? I walk often through the flea market but most of them are from Etsy or Ebay or some sellers from instagram.
2.What I do with them once they are restored? I will keep all of them and when this channel is successful I will offer them for sale and the money I receive will be donated to the needy.
I'm still learning how to work with UA-cam,so please help me out by subscribing and if you like my content tell me what you think in the comments section.
©COOL AGAIN RESTORATION ALL RIGHTS RESERVED© Thank you! Best regards!
This Axe was Trash - Restored it into a Treasure
In today's video I restored this extremely rusty axe , found by a local in Waccamaw River . I worked a lot to restore the axe head but the brilliance of this video is the handle with a superb design, rarely seen until now.
If you liked the video and want to support my work , leave a subscribe and a like . Also if you have questions, feel free to comment and I will reply soon.
Thanks a lot and hope you enjoy the restoration ! Cheers , David !
If you liked the video and want to support my work , leave a subscribe and a like . Also if you have questions, feel free to comment and I will reply soon.
Thanks a lot and hope you enjoy the restoration ! Cheers , David !
Переглядів: 277 159
Відео
Watch this Restoration , Win this Restored Skilsaw !
Переглядів 229 тис.2 місяці тому
In this video, I restored a rusty Skilsaw into a collector's item that you can win! The journey of this restoration began a few months ago when I was approached by SKIL Europe. In celebration of their 100th anniversary in March of this year, they requested that I restore a tool for them. They presented me with several old tools from their storage, and I chose to restore a circular saw. This cho...
German Bread Guillotine Restoration - Antique Kitchen Tool
Переглядів 1,1 млн6 місяців тому
Video about restoration of an Antique German bread guillotine , probably made it 100 years ago or much more. In this video I restored a German slicer , from Peter Dienes. I didn't manage to find out its exact age, but I know that it was manufactured around the first world war. Peter Dienes made many bread slicers, among other machines for use in the kitchen , but this slicer was designed for th...
I made Insane Pool Ball out of Stainless , Copper and Epoxy Resin - Lathe Turning Ball
Переглядів 1,9 млн7 місяців тому
In this video I make a no. 15 pool ball out of stainless steel , copper and epoxy resin. After seeing @mymechanics 8 ball video , I told myself that I have to make a ball out of it too because it is very challenging in the machinist field. The only thing I had to do was to find a way to use different techniques from My Mechanics, firstly so as not to copy his work and secondly but not least , t...
Vintage 1960’s Super Foosball Table - Restoration
Переглядів 696 тис.9 місяців тому
This video is about the restoration of a wonderful table football game from the 60s, produced by the Dutch company Homas . More about the restoration process : I started the restoration by sanding the metal bars and cleaning the rust , after which I made other handles and end caps on the lathe from POM-C material. Then I continued restoring the wooden parts that made up the frame . Once , there...
Rusty Meat Slicer Restoration - I’m Making a Sandwich for You !
Переглядів 2,1 млн11 місяців тому
In this restoration video I restored an antique meat or vegetable slicer from around the year 1890. More about the slicer : I bought this slicer from a flea market. It cost me $80, but compared to the prices on eBay , which exceed $100, I think I made a good choice. I liked this item from the moment I saw it and knew it would be a cool restoration project. More about the restoration : As in eve...
1930 German Stabila Spirit Level - Restoration
Переглядів 1,1 млнРік тому
Antique Stabila Level with Egona Garantie and Stabila marks , made of Indian teak wood ( tropical hard wood ) . I bought this level a year and a half ago with the intention of restoring it, but I later thought that it was not worth the restoration . I abandoned it in my workshop, and a month ago I discovered that the ones from the Stabila company are still working. I asked them some questions a...
Subscriber Sent Me His Grandfather's Wrench for Restoration
Переглядів 815 тис.Рік тому
In this video I restore an antique wrench sent to me by a subscriber from Italy. The wrench belonged to his grandfather who later died. This is a nice clean combination wrench for either nut or pipe work. It has a clear maker's mark and is made by Bemis & Call .The condition of the wrench is good with some minor dings and dents, but with a lot of rust. Has a solid hardwood handle with 3 hairlin...
1883 Meat Slicer Restoration - Tucker & Dorsey Edition
Переглядів 2,1 млнРік тому
In this video I restored a meat slicer from 1883 - Tucker & Dorsey Mfg. Co. Indianapolis . Short infos about restoration: I started the restoration by disassembling this slicer. I immediately noticed that some parts were not original, some wooden parts could be restored, while others had to be rebuilt. I tried to preserve the originality of the product so that the restoration does not spoil its...
Neglected Wilton Vice Restoration
Переглядів 610 тис.Рік тому
This video is about restoring an old Wilton Mechanics vise. My best restoration video with amazing techniques of restoration. Enjoy the video ! More about the vise : I won this vise at an Ebay auction. The seller claimed it was from 1964, so I did my best to win the auction. I thought it was quite a valuable piece and I thought that will be a nice restoration , so I paid $380 plus another $400 ...
1905's Cheese Wire Slicer - Restoration
Переглядів 10 млнРік тому
In this restoration video I restored an antique butter or cheese slicer from around the year 1905. More about the slicer : this item was used in commercial purpose. It was usually used in shops for the exact purchase of slices of butter-cheese or in luxury hotels where pats of butter were served in the morning at breakfast. You can cut one pound of butter into pats for individual servings. The ...
1883 Sausage Stuffer Restoration - Antique Kitchen Tool
Переглядів 6 млнРік тому
In this restoration videos you will see: lathe work , powder coating , cast iron seasoning , nickel plating and some tips, in addition to the usual restoration work. This press is a model from the years 1880-1890. The Company is called Enterprise Mfg. Co. and is made USA. Was sent for restoration by a subscriber who likes how I restore and paid for this restoration service. I spent a month rest...
1933 French Hand Cranked Grinder - Restoration
Переглядів 1,9 млнРік тому
Restoring an old french hand cranked grinder from Val D'or , very possibly dating from 1933. As the title suggests, I restored this wonderful and complex tool. My dear friend from OTND Restoration channel sent me. I started the restoration, by disassembly, as usual. As I have seen in other restorations of the same tool, I expected the sprockets to be simple, attached only to the holes in the ge...
I Perfectly Restored This Treasure : Stanley Router Plane No. 71 1/2
Переглядів 1,6 млн2 роки тому
This video is about restoring an antique Stanley router plane no. 71 1/2 I bought this plane from an old man in a Flea market but I had no idea how this tool should look like. I was amazed by the patina and the tool itself. After some research I found that except the blade, body and the knobs, all other parts was not original. I decided to start the restoration project no matter what. After san...
1970's Large TONKA Fire Truck - Restoration
Переглядів 6 млн2 роки тому
In this video I restored a Giant Tonka toy from 1970. More specifically , a Tonka Fire Trunk Swivel Aerial Ladder. I bought this toy some months ago from Ebay from USA with $45, a little too much, considering her condition. I thought will be a nice restoration and challenging at the same time. And so it was. I started the restoration by disassembling the toy and I encountered some difficulties....
Old German "Helko Werk" Axe Restoration with Laminated Palm Swell Handle
Переглядів 2,6 млн2 роки тому
Old German "Helko Werk" Axe Restoration with Laminated Palm Swell Handle
Zippo Lighter Restoration & Making a Wooden Case for it 🔥
Переглядів 4 млн2 роки тому
Zippo Lighter Restoration & Making a Wooden Case for it 🔥
1960's Abandoned Tonka Ser-Vi-Car Toy Restoration
Переглядів 2,2 млн2 роки тому
1960's Abandoned Tonka Ser-Vi-Car Toy Restoration
Antique Pruning Saw Restoration - How To Make New Saw Teeth
Переглядів 2,1 млн2 роки тому
Antique Pruning Saw Restoration - How To Make New Saw Teeth
Vintage Wooden Toy Car - Restoration & Repair
Переглядів 1,2 млн2 роки тому
Vintage Wooden Toy Car - Restoration & Repair
Antique Meat Cleaver - Perfect Restoration and Awesome Handle
Переглядів 7 млн2 роки тому
Antique Meat Cleaver - Perfect Restoration and Awesome Handle
1940 Egg Scale Restoration - Antique Kitchen Tool
Переглядів 29 млн2 роки тому
1940 Egg Scale Restoration - Antique Kitchen Tool
Hammer Restoration - $5 Hammer Reborn Into Something Amazing !!
Переглядів 1,8 млн3 роки тому
Hammer Restoration - $5 Hammer Reborn Into Something Amazing !!
Rusty Trick Dog Mechanical Coin Bank Restoration - A Funny Way to Save Money
Переглядів 1,3 млн3 роки тому
Rusty Trick Dog Mechanical Coin Bank Restoration - A Funny Way to Save Money
1930 Belgian Hammer Drill Restoration - The Coolest Tool You Ever Seen
Переглядів 6 млн3 роки тому
1930 Belgian Hammer Drill Restoration - The Coolest Tool You Ever Seen
I Made a Vibratory Tumbler "The Cyclone" - You Can Make Yours Right Now
Переглядів 191 тис.3 роки тому
I Made a Vibratory Tumbler "The Cyclone" - You Can Make Yours Right Now
$12 Rusty Hatchet Restored into Something Amazing
Переглядів 7 млн3 роки тому
$12 Rusty Hatchet Restored into Something Amazing
1970 Tonka Formula One Racing Car - Restoration
Переглядів 530 тис.3 роки тому
1970 Tonka Formula One Racing Car - Restoration
Restoration 1965s Romanian Pepper Grinder - Ugly and Rusty
Переглядів 671 тис.3 роки тому
Restoration 1965s Romanian Pepper Grinder - Ugly and Rusty
Lindo
Hats off!
Awesome job bro 👍👍
Вы талант.
Mate you made this fire engine brand new as though bought in a shop well done and thankyou so much for your professionalism and enjoyment watching your videos I can't get enough of them constantly watching your videos daily :)
Meu mano comeu o bacon cru fodase kkkkkkkk muito bom o vídeo
The smaller blade is surprisingly bothersome.
Absolutely blown away by the attention to detail. Great job.
Thanks a lot 😊
What is the tool you used at 7:57
I think it’s called “ drawknife “
I love this channel so much i purposfully rewatch previous coolagainrestoration videos
Thanks for that 😇
Dang. That brass looks so good and shiny it looks like gold
You do amazing work. Always a pleasure to watch an artist like yourself.
Thanks a lot and glad you enjoyed 😊
What a gorgeous restoration! Amazing work.
Thanks again 😊
The parts you made from scratch are absolutely bad A$$. Cold blooded. You are a artist sir
Thanks again for being here and liking my videos so much 😊 cheers
The time it takes and the fabulous job you do and the custom tools being made ain’t no telling what something like this costs.
Have you ever taken something apart and forgot where it goes?
Great job. Awesome.
Oh, insane. As in the american nonsensical way of using the word. Got ya.
is it possible to buy this phantasmic piece??
I have only been watching for a short time and I am fascinated by your efforts! This is much more enjoyable then watching television.. Thank you for doing this for us.
Thanks a lot and glad you enjoyed so much . Cheers !
I love the way you restore items and how you have all or enough machinery to make and restore parts properally
Thanks a lot for being here every time 🤗 cheers
how recent do you like comments ? 🤔
Very recent 😉
You are a MASTER!!! I love that you made your own CNC machine. I truly wish I had those abilities!!! 10/10
Thanks a lot and glad you enjoyed so much ! Cheers !
Сначала испортят вещь, потом восстанавливают))
Black locust is extremely resilient wood. The bluing was a nice touch. This thing will last generations.
Thanks a lot and glad you enjoyed 😊 cheers
Love the sneeze at the end ! Nice final tpuch to an excellent restoration project ❤
Thanks a lot and glad you enjoyed 🤗
10:53 bro gave us a free face reveal
Turned into a cooking tutorial at the end
😅
저거라면 침착맨 장모님이 주신 돌빵도 잘라먹을 수 있겠네
Very cool!
Thanks 😊
Love watching your restorations! No BS chattering or annoying music. Just the sounds of tools! This grinder came out beautifully!
Thanks a lot again 😊
Cool Again Restoration C.A.R
Absolutely nice work. Well done!
Thank you very much Gerald 😊
That’s a odd size 9 1/4. I have a 8 1/4. Skilsaw. It’s the worm drive and it is heavy but that saw will last forever. That’s all we used to use out on the job. Those things take a beating and keep on going.
Отличная работа! Я благодарен Вам за труд. Дай Вам Бог Здоровья!
Thanks a lot 😊
1:26 THE ONE PIECEEEEEEEEEEE THE ONE PIECE IS REALLLLL!
it would be funny and you just bought these things and you were 100 years old and you waited for these items to get super rusty then restored them
Well done, thanks for sharing and bringing another old toy back to life.
Thanks a lot and glad you enjoyed so much 😊
I love how at 4:26 the engraving showed up
hello your are a french youtuber no ?
Hi ! No , I’m Romanian ! 😊
Can you provide a link to so I can obtain the parts that are missing from my fire trucks, ladders, graphics,etc.?
Filing unevenness visible
I thought he was gonna restore the butter but i guess not
Not sure you will see this now but I will ask. Where did you find the new/replacement red Wilton logo? I have restored my Trademan 1750 and need a replacement!
I just typed on google my vice model and google found on eBay a seller . Try it , maybe you have luck 🍀👍 cheers
Awesome restoration hammer.
Thanks a lot and glad you enjoyed 👍
What is that attachment for the sander you used on the handle.
It is an attachment for round surfaces from the Skil sander 5 in 1 ( the model )
Saludos desde cuba ,es usted todo un maestro y artista de en la restauración ,muy hermoso resultado 👍
Thanks a lot buddy 👍
Good job.
Thank you very much Jeffrey 😊
Is it restoration or upgradation 😂
It is restoration , I didn’t upgraded. Just made it functional again 👍
good video!
Thanks a lot 😊
@@CoolAgainRestoration i subbed u deserve it!
Thanks for being here 😊